RED SEALING WAX PALM TREE SEEDS (Cyrtostachys renda lakka) Lipstick Plant The Wax Palm’s Bright Red Leaf Sheaths Make this Palm One of the Most Attractive Palms in the World. It is an Gorgeous Ornamental Palm is Perfect for Patios, Gardens, Parks, Roadsides and Around the Edges of Pools, Ponds and other Bodies of Water. It also Makes a Great Indoor Plant being they Grow a bit Slower than other Palms, they Can Grow Great for Many Years in a Container. What Makes the Red Wax Palm a Great Plant for Indoor Growth is it’s Relatively Short Height. The Slow-Growing Plant will Often only Grow to Between 8’ and 15’ Feet Tall in the Wild with a Spread of Up to 10’ Feet. Although it has a Potential Height of 40’ to 50’ Feet in Ideal Conditions over Many Years. This Stunning Feather Palm Develops a Brilliantly Colored Red Trunk and is Very Hard to Find. It is Originally from Malaysia, has been Introduced to Costa Rica, Puerto Rico, and Other Tropical Areas All around the World. In Warm Tropical Climates, it Only takes a Few Months for a 1-Gallon sized Plant to Develop into Turning “Red”, but Will take Longer in Cooler Climates. This Palm will Require a Good Overhead Light, Especially when Grown Indoors, and Constant Warmth. It’s a Cold-Sensitive Plant and for Vigorous Growth it Must be Kept above 50F, Although in other Cases, Established Plants have been known to Tolerate Upper 30’s for a Short Time. Soil Should be Rich, Moist and Loamy, and the Plant Should be Fed Monthly with a Balanced Plant Food. Providing a Bright Light, Red Lipstick Palm can be a Wonderful Indoor Plant and a Gem of Any Plant Collection. It’s Definitely Worth an Effort to Grow this Rare Beauty! Outdoors it is Hardy in USDA Zones 10b-12Red Wax Palm Germination:1) Scarify the seeds by rubbing the outer shell with sandpaper.2) Soak them in warm water for 4 days, being sure to change the water daily. Use a thermos to keep the water warm.3) Lightly press them into the top of a “sterile & well draining” potting mix. Do Not Bury, just leave part of the seed exposed as they need light in order to germinate.4) Cover the seed tray with a piece of plastic to help retain moisture.5) But sure to use a heated propagator mat to keep the temperature around 85 degrees F.6) Every few days, remove the plastic and mist with a spray bottle if it starts to dry. The have to stay moist, not wet. 7) As with any other tropical, germination is erratic & patience is needed. If you’re lucky, you may have a few pop up with a few weeks to a month, but most can take all the way up to a year at the longest so don’t toss out any that don’t sprout quickly. They’re still good and just need time.8) Periodically check the seeds when misting them to see if any mold of fungus is spotted. If you spot it on the seeds, just clean them with a copper based fungicide, and replace on top of a new sterile and moist mix again.These Rare & Gorgeous Palms are Definitely Worth the Wait!
Ponytail Palm Tree Seeds Beaucarnea recurvata Elephant Foot Indoor House Plant
Ponytail Palm Tree Seeds (Beaucarnea recurvata) Rare Elephant Foot CAUDEX Bonsai “CHOOSE FROM 10-100 SEEDS”A great feature of Ponytail palms is they are naturally quite adaptive and can thrive both indoors and outdoors. This plant acts as a sign of balance & brings in a positive dose of energy indoors (source). They are highly forgiving and can thrive on neglect. In recent years, the ponytail palm tree has become a popular houseplant and it is easy to see why. Its sleek bulb-like trunk and lush, long curly leaves make it visually stunning, and the fact that a ponytail palm is forgiving and easy in its care makes this an ideal houseplant for many people. Ponytail Palms are distinctive plants that you are not likely to confuse with any other small trees in your garden. Slow growers, these palms have swollen trunk bases that taper. They are best known for their long, slender cascading leaves that are arranged in the same way as a pony’s tail. Growing ponytail palm outdoors is possible in warmer climates and caring for ponytail palm outdoors is not difficult. If you live in a very warm climate like that found in U.S. Department of Agriculture plant hardiness zones 9 through 11, growing ponytail palm outdoors is entirely feasible. They can grow to 30 feet tall, but rarely do as houseplants. Plant them as small, unusual specimen trees or else in containers on the patio. These lovely little trees thrive in full sun with generous but infrequent irrigation. Overwatering as a houseplant will kill them. Remember that the common name of this plant is slightly misleading. The ponytail palm is not a palm at all but related to the water-sparing Yucca Family. Expect this plant to store water in its swollen trunk base to help it through dry, hot weather. Using a good Cactus/Succulent Mix will greatly benefit them.Ponytail Germination:1) Remove flakes from around the hard seeds inside. (If already cleaned, ignore this step)2) Sand the hard shells with rough grit sandpaper, then pour hot water over them and let them soak for 24 hours.3) Use a Cactus/Succulent potting mix. Moisten the soil and press the seeds lightly into the surface. Cover with a very fine layer of sand. 4) Use a heated propagator to keep the soil temperature above 68 F at all times. 75+ would be Optimal.5) Keep the container lightly moist by misting. Cover the container with plastic until germination. Remove the plastic once per day to allow excess moisture to escape.6) Keep the container in a brightly lit area but with some shelter from midday sun, which may burn new leaves. 7) As with any Tropical or Exotic, Germination will be erratic, so expect sprouts in 1 to 3 months depending upon the time of year and amount of light and heat the seeds experience.Please Check out our Other Items!Buy with Confidence as Customer Service is our #1 Priority and are available 7 days a week. If for any reason you feel as if we don’t deserve a 5 Star Rating, please contact us and we will address any issues that may arrive.
BLUEBERRY TREE SEEDS New Jersey Southern Highbush Cold Hardy Garden Fruit Plant
Southern Highbush Blueberry Seeds (Vaccinium corymbosum)Highbush Blueberries are the Most Widely Cultivated Blueberry in the US, and are a Very Popular Home Garden Fruit for Both Fresh and Frozen Use. They Grow Well in Zones 5-10, all Throughout the Southern Half of New Jersey, and Satisfactorily on Warmer Sites in Northern New Jersey where the Planting is Protected from Prevailing Winds and Winter Temperatures that Rarely Fall Below -25 Degrees F. Blueberries are Among the Most Nutrient-Dense Berries, & Have a Higher Concentration of Antioxidants than Any Other Fruit or Vegetables. They’re Also Loaded with Vitamin C, Vitamin K, Manganese, & Potassium.Best Grown in a Well-Draining Sandy Loam, that is Rich in Organic Matter. Clay Soils Can be Made Suitable for Blueberries by Adding Organic Matter (such as Peat Moss) and Sand. In Very Poorly Drainimg Soils, Blueberries may be Planted in Ridges 4 Inches Above the Surrounding Soil Level to Help Ensure Proper Drainage. Full Sunlight All Day Long is Essential for Maximum Fruit Production. Blueberries Require an Acidic Soil with a PH Range of 4.5 to 5.0. Abandoned Pastures, Fields, and Woodland Soils Generally Have a PH Suitable for Blueberry Growth, Although Only a Soil Test will Determine the Actual PH Level to Ensure Optimal Growth. Highland Blueberries will Grow Up to 7-8′ Foot Tall, with a Spread of Appx. 4-6′ Foot Wide. Plant Appx. 5′ Foot Apart. Highbush Blueberry Germination:1) Soak seeds in water for 24 hours.2) Place seeds in a moist paper towel placed inside a zip lock bag & keep in the fridge for 90 days to cold stratify them. This will break the seed’s dormancy. Periodically check to ensure they do not dry out, while being very careful not to keep them overly wet. Just slightly moist.3) Fill treys or containers with Moist Sphagnum Peat Moss. Place seeds on top of the peat moss, and cover them with a very thin layer of well draining seed starting mix. No more than 1/4″4) Use a spray bottle to mist them as needed to keep them from drying out. Misting will also help with keeping the seeds getting dislodged, and buried too deep while germinating.5) Use a heated propagator to ensure the daytime temperature stay at 70-75 degrees F. Turn off the heated mat at night to create alternating temperatures. This mimics their natural conditions, and will greatly improve germination rates.6) Use a grow light as Blueberry seeds need light in order to germinate. Or place in a window that gets filtered light, but never full sun while germinating.7) Patience is needed as germination of Highbush Blueberry seeds is erratic. Some will germinate withing 6-8 weeks, but don’t toss any out that don’t sprout quickly as some can take up to 12 weeks.
COLORADO BLUE SPRUCE TREE SEEDS (Picea pungens) “Glauca” Cold Hardy Bonsai Plant
COLORADO BLUE SPRUCE SEEDS (Picea pungens)With the dull Bluish Grey to Silvery Blue Needles, One of the Most Beautiful Evergreens, the Colorado Blue is Perfect for anything from Landscaping, Bonsai, and is often used as Christmas trees. Also the Official State Tree of Both Colorado & Utah.Grown as a Bonsai, or when used for Landscaping Projects around the House, the Shape is left up to Your Imagination, but naturally the tree reaches a height of 65~115′ at maturity with a diameter of 2~3′. It grows with a narrow, pyramidal tree with a cone shaped crown. Long lived, reaching between the ages of 600~800 years old.Requirements:Zones: 2 to 8Light: Full SunWater: ModerateNutrients: ModerateBlue Spruce Germination 1) Soak the seeds in room temperature water overnight.2) Keep the seeds in refrigerated, soil-filled zip-lock bags for four to six weeks after the initial soaking, a process that mimics the natural dormancy period they would experience during winter months in the wild. 3) Check them weekly to make sure they don’t dry out. Keep them moist, not wet.4) When planting, just sprinkle them on top, and barely cover them with a Very Light layer of soil. 5) Germination will begin 10-14 days after planting them.”Please Contact us First if you Need Anything”Will ship as soon as payment is received. “BUY WITH CONFIDENCE!!!”As Customer Service is our #1 Priority.
COLORADO BLUE SPRUCE TREE SEEDS (Picea pungens) “Glauca” Cold Hardy Bonsai Plant
COLORADO BLUE SPRUCE SEEDS (Picea pungens)With the dull Bluish Grey to Silvery Blue Needles, One of the Most Beautiful Evergreens, the Colorado Blue is Perfect for anything from Landscaping, Bonsai, and is often used as Christmas trees. Also the Official State Tree of Both Colorado & Utah.Grown as a Bonsai, or when used for Landscaping Projects around the House, the Shape is left up to Your Imagination, but naturally the tree reaches a height of 65~115′ at maturity with a diameter of 2~3′. It grows with a narrow, pyramidal tree with a cone shaped crown. Long lived, reaching between the ages of 600~800 years old.Requirements:Zones: 2 to 8Light: Full SunWater: ModerateNutrients: ModerateBlue Spruce Germination 1) Soak the seeds in room temperature water overnight.2) Keep the seeds in refrigerated, soil-filled zip-lock bags for four to six weeks after the initial soaking, a process that mimics the natural dormancy period they would experience during winter months in the wild. 3) Check them weekly to make sure they don’t dry out. Keep them moist, not wet.4) When planting, just sprinkle them on top, and barely cover them with a Very Light layer of soil. 5) Germination will begin 10-14 days after planting them.”Please Contact us First if you Need Anything”Will ship as soon as payment is received. “BUY WITH CONFIDENCE!!!”As Customer Service is our #1 Priority.
20 MOUNTAIN BLUE CORNFLOWER SEEDS PERENNIAL Centaurea montana Cold Hardy Plant
20 MOUNTAIN BLUE CORNFLOWER SEEDS (Centaurea montana) The Mountain Blue Flower (Centaurea montana) has Gorgeous Large, Showy, & Violet-Blue Flowers in Late Spring, with Spidery Deeply Fringed Flower Petals. They are Very Attractive for Many species of Butterflies & Hummingbirds. They Will Rebloom in Fall again if they are Cut Back after the First Blooming Period in Spring. You Really couldn’t Fine a More Distinctive & Beautiful Flower to Brighten up your Landscape. A Shorter Species of Cornflower, the Mountain Blue will only Grow 1-2 Feet Tall, and is appx. 18″ Inches Wide. Native to the meadows and woods of the mountains of Europe, it is drought resistant and because of this, they also do well in containers, where the soil may dry out quickly. It is very easy to grow from seed and an excellent garden plant as well as cut flower. If Kept Inside, with the Right amount of Light, they can Make a Gorgeous Houseplant Anywhere.Zones: 3-8Mountain Blue Germination:1) Fill pots or treys with a commercial seed starting mix, being sure the containers are at least 3 inches deep.2) Moisten the soil, and sow 3 seeds per container. Cover with only 1/2 inch of soil as it is very important that it stays dark with no light.3) Cover the containers with plastic to retain moisture and keep high humidity levels.4) Use a heated propagator mat to be sure that temperatures stay at 70 degrees F, or a few degrees higher.5) Expect germination in 3-4 weeks. Be sure to remove the plastic as soon as they germinate and then give them bright light, but not full sun at first.”If You Need Anything, Please Contact us First”
20 MOUNTAIN BLUE CORNFLOWER SEEDS PERENNIAL Centaurea montana Cold Hardy Plant
20 MOUNTAIN BLUE CORNFLOWER SEEDS (Centaurea montana) The Mountain Blue Flower (Centaurea montana) has Gorgeous Large, Showy, & Violet-Blue Flowers in Late Spring, with Spidery Deeply Fringed Flower Petals. They are Very Attractive for Many species of Butterflies & Hummingbirds. They Will Rebloom in Fall again if they are Cut Back after the First Blooming Period in Spring. You Really couldn’t Fine a More Distinctive & Beautiful Flower to Brighten up your Landscape. A Shorter Species of Cornflower, the Mountain Blue will only Grow 1-2 Feet Tall, and is appx. 18″ Inches Wide. Native to the meadows and woods of the mountains of Europe, it is drought resistant and because of this, they also do well in containers, where the soil may dry out quickly. It is very easy to grow from seed and an excellent garden plant as well as cut flower. If Kept Inside, with the Right amount of Light, they can Make a Gorgeous Houseplant Anywhere.Zones: 3-8Mountain Blue Germination:1) Fill pots or treys with a commercial seed starting mix, being sure the containers are at least 3 inches deep.2) Moisten the soil, and sow 3 seeds per container. Cover with only 1/2 inch of soil as it is very important that it stays dark with no light.3) Cover the containers with plastic to retain moisture and keep high humidity levels.4) Use a heated propagator mat to be sure that temperatures stay at 70 degrees F, or a few degrees higher.5) Expect germination in 3-4 weeks. Be sure to remove the plastic as soon as they germinate and then give them bright light, but not full sun at first.”If You Need Anything, Please Contact us First”
PASSION FLOWER Seeds BULK *Free Shipping* Passiflora maliformis Vine Seeds
SWEET CALABASH PASSION FRUIT Seeds (Passiflora maliformis), wholesale listing. Seeds available in bulk, up to 5,000 per order! Detailed germination instructions will be included with your order. Ships free and with tracking from the United States! No more tedious international orders to buy passion fruit seeds — get your seeds just a few days after ordering. Passiflora maliformis, also known as “Sweet Calabash”, is a beautiful, flower-coated vine capable of growing nearly 100 feet tall. Its flowers are ornate, multicolored, and grow as large as the palm of your hand, and its fruits are edible and used in cuisine around the world. This plant is a treasure for the experienced florist and casual gardener alike! This bulk listing will provide you with enough passion flower seeds for any endeavor, whether its starting your own passion fruit farm, selling the seeds yourself, or simply sharing this wonderful species with your friends & family. Take advantage of our latest deal: add two or more seed packs (of any species) and get a discount on your whole order! How are my seeds shipped?Seeds are shipped in bubble mailers via USPS First Class mail. You’ll receive a tracking number as soon as your seeds are shipped. Detailed germination instructions will be included with your packet of seeds. How long will it take for my seeds to arrive?We process all orders within one business day of being purchased. Shipping typically takes between 3 to 5 business days for USPS First Class mail. Our return and refund policy:All orders are eligible for returns. If you’re not satisfied with your purchase, please let us know! If your item is lost in transit or damaged upon arrival, we’ll gladly send a full refund right away. Just shoot us a message and we’ll work out a solution. These Passiflora maliformis seeds were harvested within the past year and have been tested for viability, however refunds / replacements are still available if you don’t have any luck germinating your seeds. About Passiflora maliformis:Common names: Sweet Calabash, Conch Apple, Wild Purple Passionfruit, Sweet Cup, Passion Fruit, Passion Flower, Passiflora Flower, Passion Fruit Vine, Passion VineGenus: PassifloraSpecies: maliformisFamily: Passifloraceae Passiflora maliformis is hardy in USDA zones 5 through 10, and will grow as a perennial in warmer climates. Passion Fruit is tolerant of droughts and cold weather, however it does best in warm weather with frequent watering. Partial sun to full sun is ideal. To germinate, gardeners scarify their seeds by rubbing them lightly against fine-grit sandpaper to help thin the seed coat. Afterwards, place the scarified seeds into hot water (not boiling, just hot to the touch, ~100F), and let them sit overnight. Replace the water with hot, fresh water the next morning. After soaking the seeds, they can be placed into starting soil, 1/4 inch deep. Make sure to keep the starter pots in direct sunlight, keep them warm, and don’t let the soil dry out. Germination should occur within 2 to 4 weeks. Considering this longer germination time, planting the seeds in late winter to early spring is ideal.
Ficus Audrey (Ficus benghalensis) – 1 TC Plant Plug Tree-3-6in – Ornamental!
Ficus Audrey (Ficus benghalensis) – 1 TC Plant Plug Tree-3-6in – Ornamental! YOU WILL RECEIVE 1 SMALL TISSUE CULTURE PLANT/PLUG, WITH ROOT BALL WRAPPED IN PAPER TOWEL AND A PLASTIC BAGGIE TO RETAIN MOISTURE. Botanical NameFicus benghalensis Common Name Ficus Audrey, banyan tree, strangler fig Family Moraceae Plant Type Tree Mature Size 5-10 ft. indoors, 65-100 ft. outdoors Sun Exposure Partial Soil Type Moist but well-drained Soil pH Acidic Hardiness Zones 9-11, US Native Area Asia Ficus Audrey CareWhile it is easier to grow than the fiddle leaf fig, ficus Audrey usually isn’t considered a beginner plant as it still requires some specific attention and care. Proper light and watering are the most important elements to get right when it comes to keeping this tree happy indoors. Plus, it benefits from regular pruning to help keep its size and shape in check.LightChoose a location that receives several hours of bright, indirect light for your ficus Audrey, such as a south or west-facing window. This indoor tree can tolerate some direct morning and evening sun, just be sure to avoid extended periods of direct sunlight during the afternoon as it may burn the leaves. SoilPlant your ficus Audrey in a moist but well-draining soil mixture. A combination of indoor potting soil, perlite, and sand is a good option for this tree.WaterAllow the top 2 to 3 inches of soil to dry between waterings and then water thoroughly. Ficus Audrey does best in consistently moist soil and should never be allowed to dry out completely. Temperature and HumidityNative to India, ficus Audrey is accustomed to warm, humid conditions. It does well in typical household temperatures, just ensure that it is not exposed to temperatures below 65 degrees Fahrenheit. Standard household humidity levels are also usually fine, although be sure to keep this tropical plant away from drafty windows or AC/heat vents that may dry out the air around it. If your ficus is showing signs of drying out (such as browning edges on the leaves) placing a humidifier nearby or moving the plant into a humid room such as a bathroom or laundry room will help.FertilizerFicus Audrey appreciates regular fertilizing during its active growing period. Fertilize once a month from the early spring to early fall with a balanced liquid fertilizer. You can also add natural fertilizers such as compost, worm castings, or bone/blood meal to the soil of.PruningSince ficus Audrey can grow up to 10 feet tall indoors, pruning is a necessary part of caring for this indoor tree. Not only will pruning help to control the size of your plant, but it encourages the tree to branch more vigorously which will make it more aesthetically pleasing and structurally sound. It is best to prune in the spring or summer months when the ficus Audrey is in its active growing period. Before you start, make sure that you lay down a protective sheet below the plant. Similar to its cousin the rubber tree, pruning causes this ficus to expels a thin latex-like sap that is extremely sticky. Keep any stem cuttings that you remove during pruning and repurpose them for propagation! These indoor trees do not need vigorous pruning every year, but pruning a few branches will control the shape and encourage a fuller appearance. Target any branches that are leggy or give your plant a lopsided appearance. If your tree doesn’t have any branches yet and is just a single tall stalk, you can cut the top of the stalk off wherever you would like branching to start.Propagating Ficus AudreyIn the wild ficus Audrey propagates readily through seed and offshoots, but indoors it is easiest to propagate this tree by stem cuttings. If you have ever propagated a fiddle leaf fig or rubber tree the process for this ficus is pretty much the same. Make sure that you lay down a sheet and wear protective gloves before getting started to avoid getting the Audrey’s sticky sap on yourself and the surfaces around you. Follow these simple steps to propagate ficus Audrey.Identify a spot along the stem that you would like to propagate. Ensure that each stem cutting will have at least 2 to 3 leaves. Using a pair of sharp, sterilized pruning shears or scissors, cut the stem to separate it from the main plant.Prepare a small pot with well-draining potting soil and moisten it slightly with a spray bottle.Add a rooting hormone to the end of each cutting and push the end of the cutting into the soil mix.Place a plastic bag over the pot to create a greenhouse-like environment and put the cutting(s) in a location that receives bright, indirect light. Water as needed to ensure that the soil stays moist.After 3 to 4 weeks roots should begin to grow, and you can remove the plastic bag.Potting and Repotting Ficus AudreyFicus Audrey does not require regular repotting and does well in the same container for 2 to 3 years at a time. It doesn’t mind being a bit rootbound, and should only be repotted once you see signs that the roots are outgrowing the container (such as roots growing through the pot’s drainage holes). Once you have determined it is time to repot, it is best to do so in the spring or summer months. Choose a new pot for that is around 2 to 3 inches wider. You want to avoid increasing the pot size by more than 3 inches as this can lead to overwatering. Remove the tree from its previous container and gently loosen some of the old soil around the roots before moving it to its new pot. Add fresh well-draining soil to the pot, keeping the rootball at the same level as in the original pot. Then water your freshly planted ficus Audrey well and return it to its original location.If you are trying to control the size of of the plant and do not want it to grow any taller, you can choose to refresh the soil but not increase the pot size. You will need to prune back the roots at this time so the tree can continue to grow in its original container.Common Pests Ficus Audrey is prone to sap-sucking pests that love its sticky sap. Keep an eye out for pests like mealybugs, scale, and aphids. Although they aren’t a sap-sucking pest, fungus gnats can also be a problem as they love to lay their eggs in moist soil. Check for pests as part of your regular care routine in order to catch potential infestations early.Common Problems With Ficus AudreyThe most common problems with growing a ficus Audrey indoors usually come from improper watering. Compared to other ficus trees, the Audrey is relatively resilient to some occasional over- or under-watering. However, it will suffer over the long term if it is not cared for properly. Here are a couple of things to watch out for. Leaves Turning YellowYellow leaves can be the result of a couple of different problems. First, if you notice one or two older leaves yellowing and falling off this could just be a natural part of the tree’s life cycle. It is normal for older leaves to fall off eventually. However, if you notice newer or an unusual number of leaves turning yellow and falling off, this is likely due to either over- or under-watering. Dropping LeavesWhile ficus Audrey is less fussy than its relative, the fiddle leaf fig, they both share the habit of dramatically dropping leaves if their watering schedule is off. If your ficus Audrey is dropping leaves it is most likely because it is under-watered. While these trees can tolerate a short period of drought after each watering, they should not dry out completely and will start to drop leaves if they dry out too much. A good watering should stop leaves from dropping.
Ficus Audrey (Ficus benghalensis) – 1 TC Plant Plug Tree-3-6in – Ornamental!
Ficus Audrey (Ficus benghalensis) – 1 TC Plant Plug Tree-3-6in – Ornamental! YOU WILL RECEIVE 1 SMALL TISSUE CULTURE PLANT/PLUG, WITH ROOT BALL WRAPPED IN PAPER TOWEL AND A PLASTIC BAGGIE TO RETAIN MOISTURE. Botanical NameFicus benghalensis Common Name Ficus Audrey, banyan tree, strangler fig Family Moraceae Plant Type Tree Mature Size 5-10 ft. indoors, 65-100 ft. outdoors Sun Exposure Partial Soil Type Moist but well-drained Soil pH Acidic Hardiness Zones 9-11, US Native Area Asia Ficus Audrey CareWhile it is easier to grow than the fiddle leaf fig, ficus Audrey usually isn’t considered a beginner plant as it still requires some specific attention and care. Proper light and watering are the most important elements to get right when it comes to keeping this tree happy indoors. Plus, it benefits from regular pruning to help keep its size and shape in check.LightChoose a location that receives several hours of bright, indirect light for your ficus Audrey, such as a south or west-facing window. This indoor tree can tolerate some direct morning and evening sun, just be sure to avoid extended periods of direct sunlight during the afternoon as it may burn the leaves. SoilPlant your ficus Audrey in a moist but well-draining soil mixture. A combination of indoor potting soil, perlite, and sand is a good option for this tree.WaterAllow the top 2 to 3 inches of soil to dry between waterings and then water thoroughly. Ficus Audrey does best in consistently moist soil and should never be allowed to dry out completely. Temperature and HumidityNative to India, ficus Audrey is accustomed to warm, humid conditions. It does well in typical household temperatures, just ensure that it is not exposed to temperatures below 65 degrees Fahrenheit. Standard household humidity levels are also usually fine, although be sure to keep this tropical plant away from drafty windows or AC/heat vents that may dry out the air around it. If your ficus is showing signs of drying out (such as browning edges on the leaves) placing a humidifier nearby or moving the plant into a humid room such as a bathroom or laundry room will help.FertilizerFicus Audrey appreciates regular fertilizing during its active growing period. Fertilize once a month from the early spring to early fall with a balanced liquid fertilizer. You can also add natural fertilizers such as compost, worm castings, or bone/blood meal to the soil of.PruningSince ficus Audrey can grow up to 10 feet tall indoors, pruning is a necessary part of caring for this indoor tree. Not only will pruning help to control the size of your plant, but it encourages the tree to branch more vigorously which will make it more aesthetically pleasing and structurally sound. It is best to prune in the spring or summer months when the ficus Audrey is in its active growing period. Before you start, make sure that you lay down a protective sheet below the plant. Similar to its cousin the rubber tree, pruning causes this ficus to expels a thin latex-like sap that is extremely sticky. Keep any stem cuttings that you remove during pruning and repurpose them for propagation! These indoor trees do not need vigorous pruning every year, but pruning a few branches will control the shape and encourage a fuller appearance. Target any branches that are leggy or give your plant a lopsided appearance. If your tree doesn’t have any branches yet and is just a single tall stalk, you can cut the top of the stalk off wherever you would like branching to start.Propagating Ficus AudreyIn the wild ficus Audrey propagates readily through seed and offshoots, but indoors it is easiest to propagate this tree by stem cuttings. If you have ever propagated a fiddle leaf fig or rubber tree the process for this ficus is pretty much the same. Make sure that you lay down a sheet and wear protective gloves before getting started to avoid getting the Audrey’s sticky sap on yourself and the surfaces around you. Follow these simple steps to propagate ficus Audrey.Identify a spot along the stem that you would like to propagate. Ensure that each stem cutting will have at least 2 to 3 leaves. Using a pair of sharp, sterilized pruning shears or scissors, cut the stem to separate it from the main plant.Prepare a small pot with well-draining potting soil and moisten it slightly with a spray bottle.Add a rooting hormone to the end of each cutting and push the end of the cutting into the soil mix.Place a plastic bag over the pot to create a greenhouse-like environment and put the cutting(s) in a location that receives bright, indirect light. Water as needed to ensure that the soil stays moist.After 3 to 4 weeks roots should begin to grow, and you can remove the plastic bag.Potting and Repotting Ficus AudreyFicus Audrey does not require regular repotting and does well in the same container for 2 to 3 years at a time. It doesn’t mind being a bit rootbound, and should only be repotted once you see signs that the roots are outgrowing the container (such as roots growing through the pot’s drainage holes). Once you have determined it is time to repot, it is best to do so in the spring or summer months. Choose a new pot for that is around 2 to 3 inches wider. You want to avoid increasing the pot size by more than 3 inches as this can lead to overwatering. Remove the tree from its previous container and gently loosen some of the old soil around the roots before moving it to its new pot. Add fresh well-draining soil to the pot, keeping the rootball at the same level as in the original pot. Then water your freshly planted ficus Audrey well and return it to its original location.If you are trying to control the size of of the plant and do not want it to grow any taller, you can choose to refresh the soil but not increase the pot size. You will need to prune back the roots at this time so the tree can continue to grow in its original container.Common Pests Ficus Audrey is prone to sap-sucking pests that love its sticky sap. Keep an eye out for pests like mealybugs, scale, and aphids. Although they aren’t a sap-sucking pest, fungus gnats can also be a problem as they love to lay their eggs in moist soil. Check for pests as part of your regular care routine in order to catch potential infestations early.Common Problems With Ficus AudreyThe most common problems with growing a ficus Audrey indoors usually come from improper watering. Compared to other ficus trees, the Audrey is relatively resilient to some occasional over- or under-watering. However, it will suffer over the long term if it is not cared for properly. Here are a couple of things to watch out for. Leaves Turning YellowYellow leaves can be the result of a couple of different problems. First, if you notice one or two older leaves yellowing and falling off this could just be a natural part of the tree’s life cycle. It is normal for older leaves to fall off eventually. However, if you notice newer or an unusual number of leaves turning yellow and falling off, this is likely due to either over- or under-watering. Dropping LeavesWhile ficus Audrey is less fussy than its relative, the fiddle leaf fig, they both share the habit of dramatically dropping leaves if their watering schedule is off. If your ficus Audrey is dropping leaves it is most likely because it is under-watered. While these trees can tolerate a short period of drought after each watering, they should not dry out completely and will start to drop leaves if they dry out too much. A good watering should stop leaves from dropping.
- « Previous Page
- 1
- …
- 6
- 7
- 8
- 9
- 10
- …
- 32
- Next Page »